   WinLIRC?
,  
 ,   ,       COM-.  
   ,   
.    ,   , 
     ,   COM-. 
     WinLIRC 0.6.4 (37 ).   irc.exe  -  (  C:\Program Files\WinLIRC\)   .  WinLIRC ,   .

WinLIRC   IP-.         
   . ,    WinLIRC 
  8765 . ,  WinLIRC     -  20  30 .

  ,   ,   ,     Windows 2000, XP (.. NT-),   Windows 9x  ME. 
,  
     COM-     
   . 
  -  
  Windows 98 
  40-50 %,   
 ( 
    ,      ..),  Windows XP   
  100 %   
.


  ,     
  . 
    http://lirc.sourceforge.net/remotes/.    .       ,    
     .  ,   .

WinLIRC   .     WinLIRC      "Reconfigure".

 ,      (COM1, COM2  ..). 
 , 
   
  , 
 "Receiver type"   "DCD". "Speed" - "115200" ( ) "Sense" - "autodetect" ( ).


  ,     . 
    "Raw Codes"      .    ?   !   ,    -  .    - ,   
,    ... ,     .

 ,    ?    "Browse..."     .  "OK",  "Hide window".   .     
 ,      .

      , 
     
.   : 

1.   "Config"  "my_tv_remote.cf" ( 
 ,      ,  "vm201.cf").      
   . 

.2.   "Learn". 

 : 

This will record the signals from your remote control and create a config file for WinLIRC.
Please enter a name for this remote. 

 WinLIRC    .           .

3. 

When learning and analyzing signals, a margin of error is used in order to handle the normal variations in the received signal. The margin of error ranges from 1% to 99%. The default is 25%, but larger values might be necessary depending on your hardware and software. If you are having trouble using your remote, try increasing this value. You may enter the allowable margin of error now, or press ENTER to use the default.
Desired margin of error for this remote? (1-99, enter=25) 

 
     -  "Enter".       .

4.

Step One: Determine signal gap, signal length, and repeat codes.
--------------------------------------------------------
You will be asked to press an arbitrary button a number of times. Please hold it in for at least one second each time, and wait at least one second between keypresses.
If you want to manually enter a signal gap and signal length, you may do so now (ie, "31000 52"). Otherwise, just hit ENTER. Gap and length?


 "Enter",  . 8)

5.

Press a button. 

      .

Please wait a second and press it again. 

       
. 

  

Baseline initialized. 

     
 ,      . 

Please wait a second and press a button again (10 left)
Please wait a second and press a button again (9 left)
Please wait a second and press a button again (8 left)
Press a button. 

6.   

 
 : 

This is a signal-repeating remote with no special repeat code.
Holding down the button can quickly yield many copies of that button's code. Therefore, 64 samples of each button will be taken. You will be prompted to enter each button's name in turn. To finish recording buttons, enter a blank button name. 

7.    WinLIRC   . 
   -   

Button 1 name? 

(
  )?  .  
  ,       ,   .     ,    . : "1", "STOP", "REW", "CH+", "VOL-", "MUTE"  ..  ...         .     ,   : 

Baseline initialized.
matches=64, faults=19 

,  matches    64.    faults (),  , 
. 

8. WinLIRC   
   -  
  .      
    .   
,  
 ,  "Enter". 

  "Configuration written successfully, don't forget to analyze".

9.   "Analyze",    "analysis successfully".   .  "OK",  "Hide window".

 WinLIRC ,    ,   

   WinLIRC.  http://lirc.sourceforge.net/   ,   WinLIRC.     
  
 Winamp (62 ),  
 
    .

